Crown (ARS212) 2.0t'2015- Quality Radiator OEM No. 16550-0V020

Crown (ARS212) 2.0t'2015- quality radiator OEM No. 16550-0V020

Basic Info.
Model NO.: KJ-62040
Radiator Type: Direct-flow
Radiator Core Type: Tube-fin
Water Temperature Sensor Type: Switch Type
Cooling Fluid Brand: Mobil
Car Tpye: Vanette Kbnc23
Core Size: PA 650*369*16mm
Core Thickness: 16mm
Tank Size: 31.5/31.5*387mm
Carton: 745*130*460mm
Export Markets: Global
Place of Origin: Guangzhou China ( Mainland)
OEM NO.: 16550-0V020
Transport Package: Neutral Packing / Blister Package /as You Request
Specification: PA 650*369*16mm
Trademark: KINGA
Origin: Guangzhou China ( Mainland)
HS Code: 8708911000
Production Capacity: 100, 000PCS/Month

Factory profile:

Year Of Establishment: Aug 27,2003

Register Capital: 1.34 million USD

Number Of Employees: 400

Floor Space: 86,000 square meters

Construction Area: 50,000 square meters

Products: Raidator & condenser & heater & intercooler

Certificate: IATF 16949: 2016

6 national patented technology certificates

Export Percentage: >91%

Units Produced (previous year): 1000,000 pcs

R & D Capacity: OEM, own brand (KINGA)

Radiator Production process:
Fin material prepare-Fin production-Core assembling-Core correction-Core
brazing-Plastic tank withhold-Radiator leakage test-Finish product package-storage

Fin-Production machine:
Normally they have 8-14 cutting edge depends on the width of fins and cooling design. And the cutting edge may be same direction or different. The angle of the each cutting edge is 28 degree.
We keep improving on our machines, now that one worker is in charge on 2 machines while before, one worker is in charge of one machine.

Semi-automated assembling machine：
We keep investing into automated machines and this is a comparatively new machine starts to use from May. We have a similar machine for condensers and which are more automated.
Radiator has more thickness and the way to assemble is
A)From aluminium coil to a radiator core, the whole process in one machine
B)This machine takes around 90 mins to adjust for another model, and when we change a new model, there are more waste of material as well. So we only use for orders with more than 300 pcs for one model.

Radiator core assembling machine and Adjustment:
After assembling, we will check the size of core and their diagonal difference and make little adjustment for a more stable brazing process. Our diagonal difference allowance for radiator is +_3mm